Hot Rolled Finished Profiles-新分类-Guotai Zhizao Engineering Machinery Co., Ltd.

设计云

Email : Helen@gtsteelstructure.com

Home page

Product

Tel : +8613780682214

WhatsApp : +8613780682214

Wechat : +8613780682214

Email : Helen@gtsteelstructure.com

WeChat

Steel Plate

11-06

2024

The width of thin plates is 500~1500 mm; the width of thick plates is 600~3000 mm. Thin plates are divided by steel type, including ordinary steel, high-quality steel, alloy steel, spring steel, stainless steel, tool steel, heat-resistant steel, bearing steel, silicon steel and industrial pure iron thin plates; according to professional use, there are plates for oil drums, Enamel plates, bulletproof plates, etc.; according to surface coating, there are galvanized sheets, tin-plated sheets, lead-plated sheets, plastic composite steel sheets, etc.

Steel Plate

Channel Steel

11-06

2024

Channel steel is divided into ordinary channel steel and light channel steel. The specifications of hot-rolled ordinary channel steel are 5-40#. The specifications of hot-rolled modified channel steel supplied by agreement between the supplier and the buyer are 6.5-30#. Channel steel is mainly used in building structures, vehicle manufacturing, other industrial structures and fixed panels. Channel steel is often used in conjunction with I-beams.

Channel Steel

T-shaped steel

11-06

2024

T-shaped steel is a kind of steel cast into a T shape. It is named because its cross section is the same as the English letter "T". The code of T-shaped steel corresponds to that of H-shaped steel. TW, TM, and TN are used to represent wide-flange T-shaped steel, medium-flange T-shaped steel, and narrow-flange T-shaped steel respectively. The expression method is also the same as that of H-shaped steel.

T-shaped steel

I-beam

11-06

2024

I-beams are structural beams that are shaped like the letter "I" and are commonly used in construction for their strength and durability. I-beams are widely used in buildings or other metal structures. When selecting I-beams in structural design, reasonable I-beams should be selected based on their mechanical properties, chemical properties, weldability, structural dimensions, etc.

I-beam

H-beam

11-06

2024

H-shaped steel is an economical cross-section and high-efficiency profile with more optimized cross-sectional area distribution and more reasonable strength-to-weight ratio. It is named because its cross-section is the same as the English letter "H".

H-beam

Angle Steel

11-06

2024

Angle joint sheet, also known as angle iron, is a long strip of steel with two sides perpendicular to each other. There are equilateral angle steel and unequal angle steel. The width of both sides of the equilateral angle steel is equal. Its specifications are expressed in millimeters of side width × side width × side thickness. Angle iron is a long strip of steel with two sides perpendicular to each other.

Angle Steel

Hot rolled small customized products

11-06

2024

Hot rolled small customized products

Recrystallization means that when the annealing temperature is high enough and the time is long enough, strain-free new grains (recrystallization cores) are produced in the fiber structure of the deformed metal or alloy, and the new grains continue to grow until the original deformed structure is completely disappear, and the properties of the metal or alloy also change significantly.

Hot rolled small customized products

< 1 >

图片名称

图片名称

WeChat

图片名称

WhatsApp

图片名称

图片名称

Address: Liaocheng, Shandong

图片名称

Tel : +86-13780682214

图片名称

WhatsApp : +86-13780682214

图片名称

Email : Helen@gtsteelstructure.com

Contact Us

Copyright © 2023 Shandong Guotai Zhizao Engineering Machinery Co., Ltd. SEO Business License Power by 300.cn